Release date:2014-10-31 stem:http://www.broswright.com
Rack system roll machine is one kind of metal roll forming machine. Actually, the rack system roll forming machine maintenance is a crucial and necessary step to keep it working normally. The rack system roll forming machine maintenance indeed includes two parts: proper operation and regular maintenance. Only by operating every parts of the rack system roll forming machine well can be possible to make sure the quality of the rack system roll forming machine maintenance. The following are the orders of regular rack system roll forming machine maintenance.
1. The first step of the rack system roll forming machine maintenance is clean off the lube in time. After the test production of new device, to clear off the lube on all transmission parts including the lube inside of the reducer box and to change the lube is necessary. At the same time, checking the oil volume inside of the hydraulic tank. When you found it is empty, just fill hydraulic oil. Meanwhile, it is possible to check the quality of the hydraulic oil every month and to deal with the water and impurity inside of the oil. Inspect whether all technique temperature control and instrument display are normal. If there is strange phenomenon, it is possible to inspect heating device and temperature control system. If necessary, ask the related experts for help.
3. The second step of the rack system roll forming machine maintenance is inspecting screws and bolts of all connecting arts to see whether there is loose phenomenon and fasten then in time. At least to inspect whether there is loose phenomenon of all electrical circuits every month and clean the ventilate dust screen on the electric cabinet. Meanwhile, it is also necessary to clean the hydraulic strainer every month. When changing shift, it is possible to inspect all working switches and whether the places of all buttons are normal. And inspect whether the limit switch is loose or not and whether the safety door is able to operate safely, accurately so as to make sure the production security.
4. The third step of the rack system roll forming machine maintenance is change the hydraulic oil and clean all control valves of electric motor and hydraulic oil. During holidays of each year, it is necessary to change the hydraulic oil and clean all control valves of electric motor and hydraulic oil. And remember to tear down the bearing parts to wash the rolling bearings and add to some new lube. If the rolling bearings have severe wear off, it is necessary to change it. And check whether there is fixed connection of all electric circuits and to change the aging circuits and correct instruments. Actually, the rack system roll forming machine is easy to corrode, so rack system roll forming machine maintenance is very necessary to carry out well.
As we know, rack system roll forming machine is one of the most useful machines in the 21st century for decades. When we buy rack system roll forming
In the modern society, I am sure anyone in manufacturing industry will be fully aware of existence of the rack system roll forming machine which is on
FAQ is a short form of frequently asked question. About rack system roll forming machine, there are many aspects of it we have to learn, such as the d
Glazed tile on the roll forming machine is the surface of the brick after burn glair brick processing. The first glazed tile roll forming machine’s surface with glaze firing together, and the main bo [Details]
Purlin rolls forming machine, the production of cement purlin roll forming machine south area. Purline, along the length of the roof level parts, on the principal rafter, is secondary into the rafters [Details]