Release date:2014-09-24 stem:www.broswright.com
What is roll forming machine? For those who do not know anything about the manufacturing industry, they definitely have no idea of what this term means. Let along how to operate the roll forming machine. A roll forming machine is a device which uses a series of rolls to form sheet metal. So far the products of the roll forming machine have been widely used in many kinds of places. The sheet metal can be used as the roofs of the supermarkets, shopping malls, make shift warehouses and so forth. The wide range of application of the products of roll forming machine further demonstrates the importance of the roll forming machine. So how to use a roll forming machine becomes the top question to those who are interested in the roll forming machine. Here are some steps of using the roll forming machine.
1. The first thing you should do is to put on the safety glasses. Never use the roll forming machine without the safety glasses or you may hurt your eyes.
2. The second step of using the roll forming machine is to put the socket onto the drive ratchet.
3. Then you need to lift the guard up which is on top of the roll forming machine.
4. Make sure that the roll forming machine and the working environment is clean before the operation of the roll forming machine, or the debris may cause the failure of the roll forming machine. Sometimes you also need to spray some tool oil to the machine to avoid corrosion.
5. Then slide the guard back, make sure that all the studs and nuts are fully tightened.
6. Check the guard to ensure that the guard will not fall during the operation of the roll forming machine.
7. Now you can turn on the roll forming machines by pressing the start button.
8. Put the metal in front of the feeder, which will roll the metal.
9. Support the metal when it is eaten by the roll forming machine, and make sure that the metal will not fall or ejected.
10. Check the products of the roll forming machine to see if the clearances of the roll forming machine is correct or not. If something is not right about the clearance, adjust the roll forming machine according to the operation manual. The operation of the roll forming machine is not quite difficult, but if we want to use the roll forming machine as long as possible, you shall never forget the regular maintenance work of the roll forming machine.
As we know, rack system roll forming machine is one of the most useful machines in the 21st century for decades. When we buy rack system roll forming
In the modern society, I am sure anyone in manufacturing industry will be fully aware of existence of the rack system roll forming machine which is on
FAQ is a short form of frequently asked question. About rack system roll forming machine, there are many aspects of it we have to learn, such as the d
Metal roll forming machine is designed according to the principle of material bed to grind materials. It developed in 1980s. It is a new type of energy-saving cement grinding equipment. And the main f [Details]
With the continuous improvement of people’s living standard, the demands of stainless steel products and aluminum products like machinery, light industry productions, office supplies, kitchen supplie [Details]