Products

News Details

Home >> News >> How to Operate Rack

How to Operate Rack System Roll Forming Machine

Release date:2014-10-24  stem:http://www.broswright.com

Many people don't know about the manufacturing industry, so they definitely have no idea of how to operate the roll forming machine. A roll forming machine is a device which uses a series of rolls to form sheet metal. So far the products of the roll forming machine manufacturer have been widely used in many kinds of places. The sheet metal can be used as the roofs of the supermarkets, shopping malls, make shift warehouses and so forth. The wide range of application of the products of roll forming machine further demonstrates the importance of the roll forming machine. So how to use a roll forming machine becomes the top question to those who are interested in the roll forming machine. Here are some steps of operating the roll forming machine.

1. The first step of operating rack system roll forming machine is to put on the safety glasses. If you don't wear the safety glasses, you may hurt your eyes.

2. The second step of operating rack system roll forming machine is to put the socket onto the drive ratchet.

3. The third step of operating rack system roll forming machine is to lift the guard up which is on top of the roll forming machine. Before operating of the roll forming machine, you need to make sure that the roll forming machine and the working environment is clean, or the debris may cause the failure of the roll forming machine. Sometimes you also need to spray some tool oil to the machine to avoid corrosion.

1. Then you need to slide the guard back, make sure that all the studs and nuts are fully tightened. Check the guard to ensure that the guard will not fall during the operation of the roll forming machine. After doing that you can turn on the roll forming machines by pressing the start button. Put the metal in front of the feeder, which will roll the metal. Support the metal when it is eaten by the roll forming machine, and make sure that the metal will not fall or ejected.

2. The last step of operating rack system roll forming machine is to check the products of the roll forming machine to see if the clearances of the roll forming machine is correct. If something is not right about the clearance, you need to adjust the roll forming machine according to the operation manual. The operation of the roll forming machine is not quite difficult, but if we want to use the roll forming machine as long as possible, then don't forget the regular maintenance work of the roll forming machine. That's the ways of how to operate rack system roll forming machine. After reading it you must know some knowledge of rack system roll forming machine operation.

Related News

我要啦免费统计