Products

News Details

Home >> News >> How to Improve Cable

How to Improve Cable Tray Roll Forming Machine

Release date:2014-07-22  stem:http://www.broswright.com/

There are some conditions that affect cable tray roll forming machine products connecting. The most important factor of the cable tray roll forming machine connecting is temperature of the base roll forming products since the temperature must be higher so as to attain the connection with the overlay. The base cable tray roll forming machine products can be cast by the upper caster in terms of solidification length.

In general, the longer the cable tray roll forming machine solidification length, the lower the temperature of the final products and the temperature of the base cable tray roll forming machine will become higher as the roll speed becomes greater. The base cable tray roll forming machine products goes through the cooling length at shorter time as the roll speed increases ever since the first roof panel roll forming machine. As the result, the cooling time of the base cable tray roll forming machine products will become shorter and the decrease of the temperature becomes lower. The cable tray roll forming machine temperature becomes higher as the heating length by the melt of the overlay becomes longer.

This is because the connecting condition of the base cable tray roll forming machine products can be better as the load of the lower caster increases. The increases in the cable tray roll forming machine melting temperature become higher according to the photograph of the tandem vertical type ever since the first roof panel roll forming machine. The small cable tray roll forming machine roll diameter can be decided to reduce the cooling length in the experimental conditions according to the casting data of the unequal diameter roll caster.

The width of the cable tray roll forming machine roll in the lower caster is wider than that of the upper roll caster in order to reduce the interference by the side dam plate of the lower roll caster ever since the first roof panel roll forming machine. The three layers of clad cable tray roll forming machine products could be cast at varied speeds depending on the requirements. The cable tray roll forming machine cross sections is clear due to the fact that the cable tray roll forming machine roll speed has affected the connection of the base roll forming products and the overlay. The base roll forming products will not be connected with the overlay at the speed of 20 m/min since the interface between the two is not clear at speed of 40 m/min. Mixed zone in cable tray roll forming machine might exist as well before the roll forming products are connected at the speed of 30 m/min ever since the first roof panel roll forming machine.

Related News

我要啦免费统计