Products

News Details

Home >> News >> Control of the Roof

Control of the Roof Panel Roll Forming Machine

Release date:2014-07-01  stem:www.broswright.com

Melting is the first step in roof panel roll forming machine so as to make roll forming and casting one of the essential importance for final product quality. It is mainly used to control the required roof panel roll forming machine elements. Hence, advanced melting technology and equipment have to be applied before the use of roof panel roll forming machine, such as the refining equipment so as to get super low carbon stainless steel. This is mainly because poor control of the melting process is very susceptible to the result of roof panel roll forming machine hot cracks and segregation. In addition, the control of such gases in roof panel roll forming machine oxygen, nitrogen and hydrogen is very important to guarantee the excellent properties of the roll forming final products.

There are also several cases of roof panel roll forming machine hot cracking occurrence in heavy castings such as runner band and crown and the mill housings. For the roof panel roll forming machine hydraulic turbine blades the deformation principle has not been clear so large machining allowance is given to assure the final roof panel roll forming machine shape and dimension. This might result in excessive machining of the roof panel roll forming machine. For instance, the domestically produced roof panel roll forming machine blade casting needs to be machined for ten days each but its utility is just a bit over twenty percent. The formation of roof panel roll forming machine final products is highly related to melting, casting design and quality control as well as the heat treatment after the roll forming process. The determination of inverse formation is critical to the final roof panel roll forming machine shape.

Therefore, the distortion in heat treatment process should be controlled and measured for further deducing the formation principles. There is still lack of systematic measurement of the roof panel roll forming machine during each process and the principle has not yet been obtained. The heat treatment is necessary to acquire the desired roof panel roll forming machine final product micro structure and properties, including the quenching and tempering features. The downspout roll forming machine kit can also be used to normalize the stress in relief annealing so as to optimize the thermal program during heat treatment that contains a relatively high heating and cooling rate.

Therefore, we may say that the roof panel roll forming machine soaking temperature and time are very critical to the final roll forming product properties in terms of hardness, yielding strength and tensile strength. Meanwhile, the control of roof panel roll forming machine micro structure is the guarantee of the residual stress in downspout roll forming machine kit quality control.

Related News

我要啦免费统计