Products

Products

Home >> Products >> Cut To Length Line >> High-Speed Cut To Le

High-Speed Cut To Length Line

Release date:2013-11-20  stem:

High-Speed Cut To Length Line

Description:

This high-speed cut-to-length line is able to uncoil & level a coil strip, and then shear the leveled flat strip to certain length of sheets at line speed of max 100m/min. It is referred as coil strip CTL machine in general place. This CTL machine is suitable for thin sheet or thin coil cut-to-length. If you have other requireoemts, diverse roll forming machines for sale can be also provided to you. Best quality and price they are.

Introduction:
The high speed cut-to-length line adopts servo length-fixing and pneumatically mechanical shearing to make sure sheet length precision and clean shearing notch.
The coil strip high speed cut-to-length line (CTL machine) is composed of: coil loading car, single-mandrel decoiler, coil-head guide, press & shoveling equipment, pinch-feeding roller & leveling machine, hole accumulator, side guide, fine leveling & length-fixing machine, pneumatically mechanical shearing machine, delivery belt, piling-up bracket, up-down lifting table, moving-out car, hydraulic system and electric control system.
The high speed CTL machine (coil strip cut-to-length) fit steel coils with thickness: (0.2-2mm, 0.3-3mm, 0.6-4mm, or 1-5mm) and changeable width and length of finished sheets depend on customer's practical need.
Advantages and Characteristics of Coil Strip Cut to Length Line:
1. Fast speed and high precision
Line speed can be up to 100m/min, 25-30pcs/min 2000mm Length sheets in average.
Leveling precision: ±1mm/㎡
Sheet length precision: ±0.5mm/m
Sheet diagonal length precision: ±0.5mm/m
2. Thin coils differ in coil weight, when max coil weight is small, usually single mandrel (cantilever) uncoiler for this high-speed cut-to-length line is adopted.
3. To make flat steel sheets, the diameter of leveling rollers should be scientifically proper, we confirm diameter of leveling rollers by actual experiences and engineering calculation.
4. Automatically piling-up bracket can receive finished sheets and automatically pile them up orderly.
5. Hole accumulator between leveling machine and fine leveling, is necessary to protect sheet surface and make sure the simultaneously work of leveling machine DC motor and fine leveling servo motor.
Detail specification:
Model thickness width Length Leveling speed
SW-2 x 1000 0.2-2.0mm 400-1000mm adjustable Max 100m/min
SW-3 x 1250 0.3-3.0mm 500-1250mm adjustable Max 100m/min
SW-4 X 1500 0.6-4mm 500-1500mm adjustable Max 80m/min
SW-5x1600 1-5mm 500-1600mm adjustable Max 80m/min
Note: The data in the form just as reference according to general ranges, we always design and make each line according to each customer's specific requirements, so each customer can buy his own well-content CTL Machine line from us.

Tags: roll-forming-companyaluminum-bending-machine

Please leave your contact information, we will contact you shortly. * Indicates a required field

  • Name:

    *

  • Phone:

  • E-mail:

    *

  • Address:

  • Content:

    *

  • Verification code:

Related Products